Alisyn family of 100% synthetic oils is considered to be the world benchmark. They are used in the most demanding racing environments and are proven to reduce wear, friction, and operating temperature. The additive package was formulated to give exceptional load carrying capabilities (+4500 lb. Falex loads) while offering superior oxidation stability compared to other lubricants on the market.
Customers report reduced operating temperatures up to 45°F when compared to conventional lubricants and up to 30°F compared to other synthetic motor oils. These performance characteristics result in operating efficiency increases of up to 15%.
Synthetic Lubricating Oil
Alisyn synthetic motor oils are blended to give the highest possible performance, regardless of cost. We use expensive ingredients that make it impossible to compete, based on cost, with most other motor oils on the market. Alisyn motor oils are designed for high performance race engines, not the small test engines used for API certification.
The large difference in price between Alisyn products and other lesser brands of lubricants has led people to ask why they should spend more money for Alisyn products. There are several very good reasons.
ASTM D-3945B - Sheer Stability
The highest shear rates for an oil occur in the bearings of an engine. You will get the best bearing protection from an oil that exhibits less viscosity shear down. This translates directly to longer bearing and engine life, and makes it possible to use lower viscosity oils.
ASTM D-4172 - Coefficient of Friction
The use of Alisyn oil will cut internal frictional losses by almost half compared to other synthetics. This translates directly to less wear, more power, and better fuel economy.
ASTM D-2625 - Boundary Lubrication Falex Test, (fail load)/(PSI @ load)
The Falex test separates the men from the boys when it comes to wear prevention. The Falex fail load is 1,000 lbs. higher for Alisyn compared to other synthetics. In addition, Alisyn oils produce much smaller wear scars at the pre-failure load stage of 4,250 lbs. compared to other synthetic oils, as indicated by the much higher calculated pressure (PSI). This means Alisyn oils will carry a much higher load before you get metal-to-metal contact. All of our engine and gear oils, even at the lowest oil viscosity, carry the same high 4,000 lb to 4,500 lb Falex sliding loads. This means that lower viscosity Alisyn oils can safely be used in race engines, materially reducing power losses from pumping high viscosity engine oils. No other manufacturers make this claim.
The Racing Environment - The Final Test. For the last 20 years Alisyn oils have proven themselves time and time again in the real world racing environment. Just ask any of our loyal customers.
Have a Question Related to Motorcycle Fairings or Parts orders? Check out our quick view FAQs
✅ 100% Fitment Guarantee: Each Fairing kit is engineered to fit your motorcycle perfectly, with no modifications or drilling required.
✅ 100% Quality Guarantee: We use premium-grade ABS plastics and a three-layer painting process to deliver fairings that meet the highest standards of durability and finish.
✅ 100% Delivery Guarantee: We guarantee your order will arrive on time and in perfect condition. If any items are damaged during transit, we’ll replace them for free.
✅ Top Brands and Suppliers: We only use the best names in the aftermarket powersport industry to ensure premium quality and reliability for all motorcycle parts.
✅ Quality Guarantee: We stand by the durability and performance of our parts, offering assurance that every product meets our rigorous standards.
✅ Delivery Guarantee: We ensure your order arrives on time and in perfect condition.
✅ Returns : Returns are accepted for parts in their original, unused condition within 30 days of purchase.
Check Out some of our Independent Reviews!
How does the Order process work?
Order Confirmation: Once you place an order on our site our Customer Support team will contact you directly to confirm the specifications and any custom requirements or questions you have. (You can also request an itemised invoice to review first if you prefer – Just ask)
Project Approval: Once project is Completed, we will then send you several 'Proof Pics" for you to approve your paint job is exactly what you want prior to Boxing & Shipping.
Shipping: One your Kit is carefully boxed and shipped we will monitor and provide shipping updates when we receive details from our logistics partner. We are always available at any time to answer questions.
What’s included in Each Fairing Kit?
✅ Complete Set of Injection Moulded Fairing Plastics to Suit your Specific Model (between 10-30 separate items depending on the model)
✅ Highest Quality Paintwork that includes x3 layers of your choice of Paint Combination PLUS x3 Layers Gloss Coat.
✅ Professionally Installed Pre-Drilled Mounting Holes, Ready For quick Installation.
✅ Free Heat Shields pre installed to protect Fairings from heat damage
✅ Free Windshield
✅ Free Bolt Kit
Every NiceCycle Custom Fairing / Bodywork Kit is Hand Crafted & "Made to Order " ( Nicecycle kits are not Cheap Pre-Painted Off the Shelf Kits ) Project Steps and Customer Approval is as Follows.
Once your Project has been Completed and Customer has Approved , we complete Boxing and shipping : Once you have approved your project to our team for Boxing and Shipping we will immediately start Carefully packing your New Fairing Kit in Protective wrapping and Start the Delivery process and Provide Tracking Numbers . We offer a 💯 Delivery Guarantee!
Shipping : 🚚 (USA / Canada / Europe & Australia) is Calculated at Cost Price ( ZERO Mark Up ) (Please Note : These Kits require Large and carefully packed large boxes with many pieces ( Between 15 -30 Items in 1-2 very well packed large boxes ).Once Boxed and Shipped have an average of a 7- 14 Working Day delivery window. Please contact us for further information "before" you place an order if you have any queries).
Note: If you want any FREE Paint modifications or a Custom Look - Just ask its FREE - Click Here
💦 Custom Paintwork Queries 💦
We have custom Painted Over 8,000 different Paint-jobs Since 2008 - If you have an Idea Just ask - Its Free Click Here& fill in your Details , one of our Gearheads from the Paint-shop will help you Turn your Idea into an Awesome , Affordable new Look for your Bike !
Thats the Nicecycle Guarantee!
Here are some FAQs to Help Get you Started.
Here at NiceCycle we are dedicated to making sure your Parts Search and Purchase is a satisfying one!
✅ Looking for a Unique Motorcycle Part of Accessory or Have a Question ? Simply Hit Live Chat button - Within 24 hours one of our Gearheads will have searched multiple Suppliers to find you as many options as possible, With access to suppliers with more than 500,000 items its likely we can find it for you what your looking for!
✅ Price Guarantee - We Guarantee to beat any (non sale) Price advertised on any Dealer approved site
✅ Returns and Refunds - If there are any issues with your purchase please contact us so we can do what it takes to make it right and get you back out on the road!
PARTS Returns are accepted at NiceCycle.com. All returned items must be returned in their original condition, un-mounted and free of defects. Returns are subject to our specific time frame allotted for returns . Return shipping is at the expense of the customer. There is a 10% restocking fee on all returned items. Cancellations or orders that are in progress, and cancelled by the customer will be subject to a 10% restocking/handling fee. Simply email [email protected]and we will forward steps to return
OEM Quality , Professional Paintwork Team , 100% Guarantee
Since 2008 the Largest Supplier of Custom Fairings ⭐⭐⭐⭐⭐
OEM Quality , Professional Paintwork Team , 100% Guarantee
Since 2008 the Largest Supplier of Custom Fairings ⭐⭐⭐⭐⭐
OEM Quality , Professional Paintwork Team , 100% Guarantee
Since 2008 the Largest Supplier of Custom Fairings ⭐⭐⭐⭐⭐
Watch the complete process of this CBR1100RR custom Paintwork , Fitment and Finish!