 |
 |
 |
|
KTM 1190 Adventure / R 2013-2017 Scotts Steering Damper Stabilizer Kit
Shown here is the complete bolt on SUB mount kit for the 1190 Adventure
and R models. This is a substantial improvement to this model. This is a
rubber SUB mount to help reduce vibration to the hands and it mounts to
the stock triple clamp. The kit includes everything you need to make
the installation easy and quick. This kit raises the handlebars 33mm
and puts the forward 13mm, a position we found to be very popular for
this model. If for some reason you want lower bend bars, you can select
your choice of optional bends, right here by viewing the pull down
menu. You have the option of selecting a rebound or non-rebound style
stabilizer above. Click on the "?" to get more info about that. The
text below this is generic text that applies to all our SUB mounts. (The
large knob shown in this picture is also an upgrade option not included
in the standard kit).
"SUB" mount stands for Stabilizer
Under Bars, originally designed for raising the bars. These kits are
designed for use with Oversize bars. "Bar reducers" are available as an
option, to convert the kit to standard diameter bars, should that be
desired. This concept allows more room for other equipment such as,
Global Positioning Systems(GPS) or Enduro/Rally computers and yet still
retain the quick access for adjusting the stabilizer. This is also good
for the taller rider who wants his bars a little higher, as it raises
the bar location approximately 11-25mm, depending on the model of bike.
In some cases, you might consider a lower bend handlebar bend at the
same time, unless you are trying to achieve a higher bar height along
with your stabilizer installation. We can also help you with other
handlebar choices to match your desired setup, as we have a full
selection of handlebars to choose from on this website. The SUB mounts
are only available on certain models based on the physical limitations
of mounting in this area. Each SUB mount comes complete with all
necessary parts, hardware and "Step by Step" pictured instructions. If
you have any questions, feel free to call or email us.
The Photo attached here may be a generic photo to show you the basic
components in the kit, but may not be showing the exact kit for your
specific bike.
|
|
|
 |
|
 |
|