 |
 |
 |
|
KTM 990 Adventure 2007-2013 Scotts Steering Damper Stabilizer Kit and Triple Clamp
Shown here is the complete Triple clamp Sub mount kit for the 950/990
ADV. The kit includes a black anodized billet, 5-star rated Scotts
triple clamp, Sub mounted Stabilizer, RSA style low-vibration handlebar
mounts, anodized frame bracket, hard chromed tower pin, key lock
bracket, stem holding tool, all necessary hardware, Owner's manual and
step by step pictured instructions. The kit includes a key adaptor that
retains the stock key lock. This kit requires drilling out the stock
security bolts in the key switch but we provide the procedure to
accomplish this fairly easy operation. The triple clamp will raise the
bars 10mm and move them forward 21mm for a more desirable riding
position. This kit is a dramatic improvement to this motorcycle and is
endorsed by Scot Harden and Jimmy Lewis of Paris to Dakar fame.
We
designed a Triple Clamp to accept the SUB mount putting the Stabilizer
Under the Bars while still allowing access for on-the-fly adjustment.
The beauty of this design is; you can take your stabilizer from one bike
to another without having to buy another stabilizer. The stabilizer
unbolts from the mounting components on all of our kits. In addition,
our triple clamps received the highest 5-star rating from multiple
leading National Magazines, including Dirt Rider and Motocross Action.
This triple clamp kit is machined from a 6061 billet block of aluminum
and then anodized to give your model that "Factory bike" look, while
increasing performance in strength, stability, steering and adding
clamping surface. Some off-road bikes have such large, awkward triple
clamps that stabilizer installation and fuel tank options have become
very difficult. The Scotts/BRP triple clamps are machined to be very
attractive and extremely functional, eliminating the majority of
problems associated with many after market triple clamps. We also make
some triple clamps exclusively that cannot be found anywhere but at
Scotts. The Sub Mount kit is designed to use 1 1/8" (28mm) oversize
handlebars but can be converted back to standard 7/8" (22mm) diameter
bars by using our optional bar reducers. The SUB Mount Triple clamp
kit, in most cases, includes the Scotts/BRP Triple Clamp with matching
anodized barclamp, Scotts steering stabilizer, linkarm, SUB mount frame
bracket, all the necessary hardware, step by step pictured instructions
and the Owners Manual. The SUB mount typically raises the position of
the bars approximately 11-25mm, depending on the model, which may or may
not be an advantage for your riding style. If you should need a
different bend of Oversize handlebars, either higher or lower, they are
available here online for ordering, at an additional charge. Use the
product index and select Handlebars for a full menu of bar selections.
The Photo you are looking at is a generic photo to show you the basic
components in the kit, but may not be showing the exact kit for your
specific bike. The bars in the picture are not included in the kit.
|
|
|
 |
|
 |
|